- Bạn vui lòng tham khảo Thỏa Thuận Sử Dụng của Thư Viện Số
Tài liệu Thư viện số
Danh mục TaiLieu.VN
Lecture Automatic control systems technology - Lesson 5: Mathematical models of electrical control system components. After this presentation you will be able to: identify types of subsystems found in control systems; list the characteristics of electrical subsystems; write mathematical models for electrical characteristics; solve for steady-state electrical quantities using given mathematical modeling equations;... Please refer to the content...
15 p ctuet 27/12/2023 11 0
Từ khóa: Lecture Automatic control systems technology, Bài giảng Công nghệ hệ thống điều khiển tự động, Automatic control systems technology, Electrical component models, Control system components, Mathematical modeling equations
Lecture Automatic control systems technology - Lesson 2: Performance of control systems
Lecture Automatic control systems technology - Lesson 2: Performance of control systems. After this presentation you will be able to: explain what constitutes good control system performance; identify controlled, uncontrolled, and unstable control system response; analyze measurement error in measurement sensors; determine sensor response;... Please refer to the content of document.
30 p ctuet 27/12/2023 9 0
Từ khóa: Lecture Automatic control systems technology, Bài giảng Công nghệ hệ thống điều khiển tự động, Automatic control systems technology, Performance of control systems, Control system performance, Subsystem errors accumulate
Lecture Automatic control systems technology - Lesson 14: Transfer functions of DC motors
Lecture Automatic control systems technology - Lesson 14: Transfer functions of DC motors. After this presentation you will be able to: write the transfer function for an armature controlled dc motor; write a transfer function for a dc motor that relates input voltage to shaft position; represent a mechanical load using a mathematical model;... Please refer to the content of document.
28 p ctuet 27/12/2023 11 0
Từ khóa: Lecture Automatic control systems technology, Bài giảng Công nghệ hệ thống điều khiển tự động, Automatic control systems technology, Transfer functions of DC motors, Steady-state model, Torque-current curve
Lecture Automatic control systems technology - Lesson 13: Effects of negative feedback on system disturbances. After this presentation you will be able to: reduce a block diagram with multiple inputs using superposition theory; explain how negative feedback reduces the effects of system disturbances with a proportional controller; interpret step-response time plots;... Please refer to the content of document.
20 p ctuet 27/12/2023 12 0
Từ khóa: Lecture Automatic control systems technology, Bài giảng Công nghệ hệ thống điều khiển tự động, Automatic control systems technology, Superposition theory, Interpret step-response time plots, Matlab control toolbox
Lecture Automatic control systems technology - Lesson 22: Determining control stability using bode plots. After this presentation you will be able to: list the control stability criteria for open loop frequency response; identify the gain and phase margins necessary for a stable control system; use a bode plot to determine if a control system is stable or unstable;... Please refer to the content of document.
15 p ctuet 27/12/2023 10 0
Từ khóa: Lecture Automatic control systems technology, Bài giảng Công nghệ hệ thống điều khiển tự động, Automatic control systems technology, Bode plot stability criteria, Stable control system, Determine system stability
Lecture Automatic control systems technology - Lesson 20: Process characteristics-2nd order lag process. After this presentation you will be able to: describe typical 2nd order lag models found in control systems; write mathematical formulas for 2nd order lag process models; compute the parameters of this process model; identify the Bode plots of this process model;... Please refer to the content of document.
23 p ctuet 27/12/2023 11 0
Từ khóa: Lecture Automatic control systems technology, Bài giảng Công nghệ hệ thống điều khiển tự động, Automatic control systems technology, Second order lag processes, Second order system responses, Second order mechanical system
Lecture Automatic control systems technology - Lesson 17: Combined mode control
Lecture Automatic control systems technology - Lesson 17: Combined mode control. After this presentation you will be able to: describe the common control mode combinations used in analog control systems; list the characteristics of combined control modes; write the time, Laplace and transfer functions of combined control modes;... Please refer to the content of document.
28 p ctuet 27/12/2023 15 0
Từ khóa: Lecture Automatic control systems technology, Bài giảng Công nghệ hệ thống điều khiển tự động, Automatic control systems technology, Combined mode control, Proportional-Integral control, Proportional-Derivative control mode
Lecture Automatic control systems technology - Lesson 18: Integral process characteristics
Lecture Automatic control systems technology - Lesson 18: Integral process characteristics. After this presentation you will be able to: describe typical process models found in control systems; write mathematical formulas for process models; compute the parameters of process models; identify the Bode plots of typical process models; identify the time response of typical process models;... Please refer to the content of document.
14 p ctuet 27/12/2023 12 0
Từ khóa: Lecture Automatic control systems technology, Bài giảng Công nghệ hệ thống điều khiển tự động, Automatic control systems technology, Integral process characteristics, Time domain equation, Integral process time response
Lecture Automatic control systems technology - Lesson 23: Nyquist stability criteria
Lecture Automatic control systems technology - Lesson 23: Nyquist stability criteria. After this presentation you will be able to: list the control stability criteria for a Nyquist Plot; construct a Nyquist plot using MATLAB; identify if a system is stable by plotting system response on a Nyquist plot; use MATLAB to generate system Bode, Error and Nyquist plots given the script file. Please refer to the content of document.
17 p ctuet 27/12/2023 12 0
Từ khóa: Lecture Automatic control systems technology, Bài giảng Công nghệ hệ thống điều khiển tự động, Automatic control systems technology, Nyquist stability criteria, Plot complex numbers, The open-loop transfer function
Bài giảng Thiết kế hệ thống nhúng (Embedded Systems Design) - Chương 2 (Bài 2): Bộ xử lý chức năng đơn chuyên dụng (Custom single-purpose processors). Những nội dung chính trong bài này gồm có: Mạch tổ hợp, mạch tuần tự, thiết kế bộ xử lý chức năng đơn, thiết kế bộ xử lý chức năng đơn chuyên dụng thời gian thực.
55 p ctuet 28/11/2023 18 0
Từ khóa: Thiết kế hệ thống nhúng, Bài giảng Thiết kế hệ thống nhúng, Embedded Systems Design, Hệ thống nhúng, Mạch tổ hợp, Mạch tuần tự, Thiết kế bộ xử lý chức năng đơn
Bài giảng Thiết kế hệ thống nhúng (Embedded Systems Design) - Chương 4: Kỹ thuật lập trình nhúng
Bài giảng Thiết kế hệ thống nhúng (Embedded Systems Design) - Chương 4 (bài 8): Biểu diễn trạng thái và mô hình hóa quá trình. Những nội dung chính trong chương này gồm có: Mô hình vs ngôn ngữ, mô hình trạng thái, mô hình quá trình đồng thời, mô hình luồng dữ liệu, các hệ thời gian thực.
33 p ctuet 28/11/2023 13 0
Từ khóa: Thiết kế hệ thống nhúng, Bài giảng Thiết kế hệ thống nhúng, Embedded Systems Design, Hệ thống nhúng, Kỹ thuật lập trình nhúng, Mô hình trạng thái
Bài giảng Thiết kế hệ thống nhúng (Embedded Systems Design) - Chương 3: Lập trình hệ thống nhúng
Bài giảng Thiết kế hệ thống nhúng (Embedded Systems Design) - Chương 3 (Bài 7): Lập trình hệ thống nhúng. Những nội dung chính trong chương này gồm có: Giới thiệu MikroC, kiểu biến, từ khóa, hằng số, các toán tử, các cấu trúc điều khiển, hàm, tiền xử lý và thư viện.
20 p ctuet 28/11/2023 16 0
Từ khóa: Thiết kế hệ thống nhúng, Bài giảng Thiết kế hệ thống nhúng, Embedded Systems Design, Hệ thống nhúng, Lập trình hệ thống nhúng, MikroC For PIC
Đăng nhập
Bộ sưu tập nổi bật